Metric | English 710/70R38 TL 166A8/166B XM28 MSPN 50825 CAI 282667

Tire Technical Data Unloaded Dimensions Loaded Dimensions Rims (rec. in bold) Overall Width Overall Diameter Loaded Radius Rolling Circumference DW23A DW21A MW23A 27.6 in 76.7 in 33.7 in 226.6 in RCI # of Lugs Tube MSPN Tube CAI 47 20 x 2 88038 170088 Gross Flat Plate Tire Weight 100% Tire Volume Centerline Tread Depth Minimum Dual / Triple Spacing 523.7 in² 654.9 lb 273.2 gal 70 /32nd" 35.8 in

Load & Inflation Data Load Per Tire (Single) 30 mph 25 mph 20 mph 05 mph 25 Dual  Inflation Pressure - - 5,890 lbs 7,540 lbs 4,720 lbs 6 psi 7,610 lbs 7,610 lbs 8,140 lbs 10,340 lbs 6,690 lbs 9 psi 8,420 lbs 8,420 lbs 9,010 lbs 11,440 lbs 7,410 lbs 11 psi 9,240 lbs 9,240 lbs 9,880 lbs 12,560 lbs 8,120 lbs 14 psi 10,050 lbs 10,050 lbs 10,760 lbs 13,660 lbs 8,850 lbs 17 psi 10,870 lbs 10,870 lbs 11,630 lbs 14,760 lbs 9,570 lbs 20 psi 11,690 lbs 11,690 lbs 12,500 lbs 15,880 lbs 10,290 lbs 23 psi - - - 16,430 lbs - 24 psi - - - 16,980 lbs - 26 psi - - - 17,530 lbs - 27 psi General Notes Pertaining To Load and Inflation Data Above Load Values given at 6 psi for 25 mph and 30 mph are for calculating dual and triple load values only. All load values are for maximum indicated speeds at low torque. 20 mph load values also apply for low-speed high-torque field work. High-Speed Cyclic (HS Cyclic) load-pressure data applies to low-torque spreading or spraying at field operating speeds up to 20 mph. Additional bonus loads permitted for this type application assume a rapid decrease from full to empty, where max load at max speed (20 kph) does not occur more than 15% of any work day. Cyclic load-pressure data applies to low-torque harvesting type applications at field operating speeds up to 6 mph. Additional bonus loads permitted for cyclic applications assume a gradual load increase with unloading in the field. Load & Carry load-pressure data applies to low-torque transport operations at max speeds of 6 mph for a max distance of 650 yards before discharging load and returning empty. All load-speed-pressure data is valid for ground slopes up to and including 20%. When operating on slopes greater than 20%, please contact Michelin. For moldboard plowing with single drive tires in the furrow, a minimum inflation pressure of 10 psi is required. Availability: Comments:

Copyright ©2010 Michelin North America, Inc. · Photos Copyright: Michelin