Metric | English 380/85R34 (14.9R34) TL 137A8/137B Agribib MSPN 59412 CAI 122781

Tire Technical Data Unloaded Dimensions Loaded Dimensions Rims (rec. in bold) Overall Width Overall Diameter Loaded Radius Rolling Circumference W12 DW12 W13 DW13 15.5 in 59.2 in 26.5 in 175.6 in RCI # of Lugs Tube MSPN Tube CAI 42 23 x 2 37243 171115 Gross Flat Plate Tire Weight 100% Tire Volume Centerline Tread Depth Minimum Dual / Triple Spacing 251.3 in² 183.0 lb 81.1 gal 52 /32nd" 20.0 in

Load & Inflation Data Load Per Tire (Single) 30 mph 25 mph 20 mph 05 mph 25 Dual  Inflation Pressure - - 2,470 lbs 3,420 lbs 2,000 lbs 6 psi 2,760 lbs 2,760 lbs 2,910 lbs 3,950 lbs 2,430 lbs 9 psi 3,200 lbs 3,200 lbs 3,420 lbs 4,460 lbs 2,810 lbs 11 psi 3,640 lbs 3,640 lbs 3,910 lbs 4,980 lbs 3,200 lbs 14 psi 4,080 lbs 4,080 lbs 4,410 lbs 5,510 lbs 3,590 lbs 17 psi 4,570 lbs 4,570 lbs 4,880 lbs 6,060 lbs 4,030 lbs 20 psi 5,070 lbs 5,070 lbs 5,360 lbs 6,610 lbs 4,460 lbs 23 psi - - - 6,950 lbs - 24 psi - - - 7,280 lbs - 26 psi - - - 7,610 lbs - 27 psi General Notes Pertaining To Load and Inflation Data Above Load Values given at 6 psi for 25 mph and 30 mph are for calculating dual and triple load values only. All load values are for maximum indicated speeds at low torque. 20 mph load values also apply for low-speed high-torque field work. High-Speed Cyclic (HS Cyclic) load-pressure data applies to low-torque spreading or spraying at field operating speeds up to 20 mph. Additional bonus loads permitted for this type application assume a rapid decrease from full to empty, where max load at max speed (20 kph) does not occur more than 15% of any work day. Cyclic load-pressure data applies to low-torque harvesting type applications at field operating speeds up to 6 mph. Additional bonus loads permitted for cyclic applications assume a gradual load increase with unloading in the field. Load & Carry load-pressure data applies to low-torque transport operations at max speeds of 6 mph for a max distance of 650 yards before discharging load and returning empty. All load-speed-pressure data is valid for ground slopes up to and including 20%. When operating on slopes greater than 20%, please contact Michelin. For moldboard plowing with single drive tires in the furrow, a minimum inflation pressure of 10 psi is required. Availability: Comments:

Copyright ©2010 Michelin North America, Inc. · Photos Copyright: Michelin