Metric | English 710/55R30 TL 153A8/153B MachXbib MSPN 73905 CAI 122713

Tire Technical Data Unloaded Dimensions Loaded Dimensions Rims (rec. in bold) Overall Width Overall Diameter Loaded Radius Rolling Circumference DW23A 26.9 in 59.7 in 26.5 in 176.8 in RCI # of Lugs Tube MSPN Tube CAI 42 18 x 2 Gross Flat Plate Tire Weight 100% Tire Volume Centerline Tread Depth Minimum Dual / Triple Spacing 386.6 in² 443.2 lb 178.3 gal 63 /32nd" 35.8 in

Load & Inflation Data Load Per Tire (Single) 30 mph 25 mph 20 mph 05 mph 25 Dual  Inflation Pressure - - 4,120 lbs 5,180 lbs 3,280 lbs 6 psi 5,230 lbs 5,230 lbs 5,600 lbs 7,120 lbs 4,600 lbs 9 psi 5,790 lbs 5,790 lbs 6,210 lbs 7,880 lbs 5,090 lbs 11 psi 6,350 lbs 6,350 lbs 6,810 lbs 8,640 lbs 5,590 lbs 14 psi 6,920 lbs 6,920 lbs 7,410 lbs 9,410 lbs 6,090 lbs 17 psi 7,490 lbs 7,490 lbs 8,010 lbs 10,180 lbs 6,580 lbs 20 psi 8,050 lbs 8,050 lbs 8,620 lbs 10,940 lbs 7,080 lbs 23 psi - - - 11,320 lbs - 24 psi - - - 11,700 lbs - 26 psi - - - 12,080 lbs - 27 psi General Notes Pertaining To Load and Inflation Data Above Load Values given at 6 psi for 25 mph and 30 mph are for calculating dual and triple load values only. All load values are for maximum indicated speeds at low torque. 20 mph load values also apply for low-speed high-torque field work. High-Speed Cyclic (HS Cyclic) load-pressure data applies to low-torque spreading or spraying at field operating speeds up to 20 mph. Additional bonus loads permitted for this type application assume a rapid decrease from full to empty, where max load at max speed (20 kph) does not occur more than 15% of any work day. Cyclic load-pressure data applies to low-torque harvesting type applications at field operating speeds up to 6 mph. Additional bonus loads permitted for cyclic applications assume a gradual load increase with unloading in the field. Load & Carry load-pressure data applies to low-torque transport operations at max speeds of 6 mph for a max distance of 650 yards before discharging load and returning empty. All load-speed-pressure data is valid for ground slopes up to and including 20%. When operating on slopes greater than 20%, please contact Michelin. For moldboard plowing with single drive tires in the furrow, a minimum inflation pressure of 10 psi is required. Availability: Comments:

Copyright ©2010 Michelin North America, Inc. · Photos Copyright: Michelin