Metric | English 420/65R24 TL 126A8/126B XM108 MSPN 77842 CAI 122712

Tire Technical Data Unloaded Dimensions Loaded Dimensions Rims (rec. in bold) Overall Width Overall Diameter Loaded Radius Rolling Circumference W11 W10 W10L W11 W12 DW12 15.6 in 45.7 in 20.0 in 134.8 in RCI # of Lugs Tube MSPN Tube CAI 37 20 x 2 89251 170039 Gross Flat Plate Tire Weight 100% Tire Volume Centerline Tread Depth Minimum Dual / Triple Spacing 214.2 in² 130.1 lb 52.8 gal 47 /32nd" 20.7 in

Load & Inflation Data Load Per Tire (Single) 30 mph 25 mph 20 mph 05 mph Inflation Pressure - - 1,740 lbs 2,180 lbs 6 psi 1,870 lbs 1,870 lbs 2,090 lbs 2,580 lbs 7 psi 2,290 lbs 2,290 lbs 2,450 lbs 2,980 lbs 9 psi 2,540 lbs 2,660 lbs 2,840 lbs 3,460 lbs 11 psi 2,780 lbs 3,020 lbs 3,230 lbs 3,940 lbs 14 psi 3,020 lbs 3,380 lbs 3,620 lbs 4,420 lbs 17 psi 3,260 lbs 3,750 lbs 4,010 lbs 4,910 lbs 20 psi 3,510 lbs - - 5,380 lbs 23 psi 3,630 lbs - - 5,620 lbs 24 psi 3,750 lbs - - - 26 psi General Notes Pertaining To Load and Inflation Data Above Load Values given at 6 psi for 25 mph and 30 mph are for calculating dual and triple load values only. All load values are for maximum indicated speeds at low torque. 20 mph load values also apply for low-speed high-torque field work. High-Speed Cyclic (HS Cyclic) load-pressure data applies to low-torque spreading or spraying at field operating speeds up to 20 mph. Additional bonus loads permitted for this type application assume a rapid decrease from full to empty, where max load at max speed (20 kph) does not occur more than 15% of any work day. Cyclic load-pressure data applies to low-torque harvesting type applications at field operating speeds up to 6 mph. Additional bonus loads permitted for cyclic applications assume a gradual load increase with unloading in the field. Load & Carry load-pressure data applies to low-torque transport operations at max speeds of 6 mph for a max distance of 650 yards before discharging load and returning empty. All load-speed-pressure data is valid for ground slopes up to and including 20%. When operating on slopes greater than 20%, please contact Michelin. For moldboard plowing with single drive tires in the furrow, a minimum inflation pressure of 10 psi is required. Availability: Comments:

Copyright ©2010 Michelin North America, Inc. · Photos Copyright: Michelin