Metric | English 600/65R28 TL 154A8/154B MachXbib MSPN 86350 CAI 135288

Tire Technical Data Unloaded Dimensions Loaded Dimensions Rims (rec. in bold) Overall Width Overall Diameter Loaded Radius Rolling Circumference DW20A DW18L 24.2 in 58.9 in 26.3 in 174.6 in RCI # of Lugs Tube MSPN Tube CAI 42 18 x 2 88527 101447 Gross Flat Plate Tire Weight 100% Tire Volume Centerline Tread Depth Minimum Dual / Triple Spacing 340.5 in² 352.8 lb 149.5 gal 64 /32nd" 30.9 in

Load & Inflation Data Load Per Tire (Single) 30 mph 25 mph 20 mph 15 mph 25 Dual  6 Cyc  Inflation Pressure - - 3,550 lbs - 2,910 lbs - 6 psi - - 4,880 lbs - 4,190 lbs - 11 psi - 5,490 lbs 5,560 lbs 5,750 lbs 4,830 lbs 6,950 lbs 14 psi 5,980 lbs 5,980 lbs 6,230 lbs 6,450 lbs 5,260 lbs 7,730 lbs 17 psi 6,460 lbs 6,460 lbs 6,890 lbs 7,150 lbs 5,680 lbs 8,500 lbs 20 psi 6,950 lbs 6,950 lbs 7,560 lbs 7,850 lbs 6,110 lbs 9,280 lbs 23 psi 7,280 lbs 7,280 lbs 7,880 lbs 8,180 lbs 6,390 lbs 10,070 lbs 26 psi 7,610 lbs 7,610 lbs 8,200 lbs 8,510 lbs 6,690 lbs 10,850 lbs 29 psi 7,940 lbs 7,940 lbs 8,520 lbs 8,840 lbs 6,990 lbs 11,630 lbs 32 psi 8,270 lbs 8,270 lbs 8,840 lbs 9,170 lbs 7,280 lbs 12,410 lbs 35 psi General Notes Pertaining To Load and Inflation Data Above Load Values given at 6 psi for 25 mph and 30 mph are for calculating dual and triple load values only. All load values are for maximum indicated speeds at low torque. 20 mph load values also apply for low-speed high-torque field work. High-Speed Cyclic (HS Cyclic) load-pressure data applies to low-torque spreading or spraying at field operating speeds up to 20 mph. Additional bonus loads permitted for this type application assume a rapid decrease from full to empty, where max load at max speed (20 kph) does not occur more than 15% of any work day. Cyclic load-pressure data applies to low-torque harvesting type applications at field operating speeds up to 6 mph. Additional bonus loads permitted for cyclic applications assume a gradual load increase with unloading in the field. Load & Carry load-pressure data applies to low-torque transport operations at max speeds of 6 mph for a max distance of 650 yards before discharging load and returning empty. All load-speed-pressure data is valid for ground slopes up to and including 20%. When operating on slopes greater than 20%, please contact Michelin. For moldboard plowing with single drive tires in the furrow, a minimum inflation pressure of 10 psi is required. Availability: Comments:

Copyright ©2010 Michelin North America, Inc. · Photos Copyright: Michelin