| IF 600/70R30 TL 159D Axiobib |
| MSPN |
96393 |
CAI |
280086 |
|
| Tire Technical Data |
 |
Unloaded Dimensions |
Loaded Dimensions |
Rims (rec. in bold) |
| Overall Width |
Overall Diameter |
Loaded Radius |
Rolling Circumference |
DW21A
DW20A
|
| 23.6 in |
62.4 in |
27.4 in |
184.4 in |
| RCI |
# of Lugs |
Tube MSPN |
Tube CAI |
| 43 |
20 x 2 |
|
|
| Gross Flat Plate |
Tire Weight |
100% Tire Volume |
Centerline Tread Depth |
Minimum Dual / Triple Spacing |
| 373.6 in² |
427.8 lb |
158.5 gal |
70 /32nd" |
30.0 in |
|
| Load & Inflation Data |
| Load Per Tire (Single) |
| 25 mph |
40 Single |
40 Dual |
Inflation Pressure |
| - |
- |
3,880 lbs |
6 psi |
| - |
- |
4,650 lbs |
9 psi |
| 6,170 lbs |
6,170 lbs |
5,420 lbs |
11 psi |
| 7,110 lbs |
7,110 lbs |
6,250 lbs |
14 psi |
| 7,580 lbs |
7,580 lbs |
6,660 lbs |
16 psi |
| 8,050 lbs |
8,050 lbs |
7,080 lbs |
17 psi |
| 8,440 lbs |
8,440 lbs |
7,430 lbs |
19 psi |
| 8,840 lbs |
8,840 lbs |
7,780 lbs |
20 psi |
| 9,250 lbs |
9,250 lbs |
8,140 lbs |
21 psi |
| 9,650 lbs |
9,650 lbs |
8,490 lbs |
23 psi |
| General Notes Pertaining To Load and Inflation Data Above |
- Load Values given at 6 psi for 25 mph and 30 mph are for calculating dual and triple load values only.
- All load values are for maximum indicated speeds at low torque.
- 20 mph load values also apply for low-speed high-torque field work.
- High-Speed Cyclic (HS Cyclic) load-pressure data applies to low-torque spreading or spraying at field operating speeds up to 20 mph. Additional bonus loads permitted for this type application assume a rapid decrease from full to empty, where max load at max speed (20 kph) does not occur more than 15% of any work day.
- Cyclic load-pressure data applies to low-torque harvesting type applications at field operating speeds up to 6 mph. Additional bonus loads permitted for cyclic applications assume a gradual load increase with unloading in the field.
- Load & Carry load-pressure data applies to low-torque transport operations at max speeds of 6 mph for a max distance of 650 yards before discharging load and returning empty.
- All load-speed-pressure data is valid for ground slopes up to and including 20%. When operating on slopes greater than 20%, please contact Michelin.
- For moldboard plowing with single drive tires in the furrow, a minimum inflation pressure of 10 psi is required.
|
|
|
Copyright ©2010 Michelin North America, Inc. · Photos Copyright: Michelin
|
