Metric | English IF 650/85R38 TL 179D Axiobib MSPN 97250 CAI 084900

Tire Technical Data Unloaded Dimensions Loaded Dimensions Rims (rec. in bold) Overall Width Overall Diameter Loaded Radius Rolling Circumference DW23A MW23A 27.2 in 80.7 in 35.9 in 239.3 in RCI # of Lugs Tube MSPN Tube CAI 48 20 x 2 Gross Flat Plate Tire Weight 100% Tire Volume Centerline Tread Depth Minimum Dual / Triple Spacing 565.4 in² 767.3 lb 317.0 gal 79 /32nd" 33.3 in

Load & Inflation Data Load Per Tire (Single) 25 mph 40 Single  40 Dual  Inflation Pressure - - 5,820 lbs 6 psi 9,370 lbs 9,370 lbs 8,250 lbs 11 psi 10,690 lbs 10,690 lbs 9,410 lbs 14 psi 12,020 lbs 12,020 lbs 10,580 lbs 17 psi 13,390 lbs 13,390 lbs 11,800 lbs 20 psi 14,770 lbs 14,770 lbs 13,010 lbs 23 psi 15,430 lbs 15,430 lbs 13,580 lbs 26 psi 16,100 lbs 16,100 lbs 14,160 lbs 29 psi 16,590 lbs 16,590 lbs 14,600 lbs 32 psi 17,090 lbs 17,090 lbs 15,040 lbs 35 psi General Notes Pertaining To Load and Inflation Data Above Load Values given at 6 psi for 25 mph and 30 mph are for calculating dual and triple load values only. All load values are for maximum indicated speeds at low torque. 20 mph load values also apply for low-speed high-torque field work. High-Speed Cyclic (HS Cyclic) load-pressure data applies to low-torque spreading or spraying at field operating speeds up to 20 mph. Additional bonus loads permitted for this type application assume a rapid decrease from full to empty, where max load at max speed (20 kph) does not occur more than 15% of any work day. Cyclic load-pressure data applies to low-torque harvesting type applications at field operating speeds up to 6 mph. Additional bonus loads permitted for cyclic applications assume a gradual load increase with unloading in the field. Load & Carry load-pressure data applies to low-torque transport operations at max speeds of 6 mph for a max distance of 650 yards before discharging load and returning empty. All load-speed-pressure data is valid for ground slopes up to and including 20%. When operating on slopes greater than 20%, please contact Michelin. For moldboard plowing with single drive tires in the furrow, a minimum inflation pressure of 10 psi is required. Availability: Comments:

Copyright ©2010 Michelin North America, Inc. · Photos Copyright: Michelin