Metric | English IF 800/70R38 TL 179D Axiobib MSPN 99142 CAI 528166

Tire Technical Data Unloaded Dimensions Loaded Dimensions Rims (rec. in bold) Overall Width Overall Diameter Loaded Radius Rolling Circumference DW27A 31.9 in 81.4 in 35.2 in 239.7 in RCI # of Lugs Tube MSPN Tube CAI 48 20 x 2 Gross Flat Plate Tire Weight 100% Tire Volume Centerline Tread Depth Minimum Dual / Triple Spacing 698.9 in² 846.7 lb 383.1 gal 79 /32nd" 39.5 in

Load & Inflation Data Load Per Tire (Single) 25 mph 40 Single  40 Dual  Inflation Pressure - - 6,700 lbs 6 psi - - 8,080 lbs 9 psi 10,750 lbs 10,750 lbs 9,460 lbs 11 psi 12,330 lbs 12,330 lbs 10,840 lbs 14 psi 13,110 lbs 13,110 lbs 11,530 lbs 16 psi 13,890 lbs 13,890 lbs 12,220 lbs 17 psi 14,680 lbs 14,680 lbs 12,920 lbs 19 psi 15,490 lbs 15,490 lbs 13,630 lbs 20 psi 16,290 lbs 16,290 lbs 14,330 lbs 21 psi 17,090 lbs 17,090 lbs 15,040 lbs 23 psi General Notes Pertaining To Load and Inflation Data Above Load Values given at 6 psi for 25 mph and 30 mph are for calculating dual and triple load values only. All load values are for maximum indicated speeds at low torque. 20 mph load values also apply for low-speed high-torque field work. High-Speed Cyclic (HS Cyclic) load-pressure data applies to low-torque spreading or spraying at field operating speeds up to 20 mph. Additional bonus loads permitted for this type application assume a rapid decrease from full to empty, where max load at max speed (20 kph) does not occur more than 15% of any work day. Cyclic load-pressure data applies to low-torque harvesting type applications at field operating speeds up to 6 mph. Additional bonus loads permitted for cyclic applications assume a gradual load increase with unloading in the field. Load & Carry load-pressure data applies to low-torque transport operations at max speeds of 6 mph for a max distance of 650 yards before discharging load and returning empty. All load-speed-pressure data is valid for ground slopes up to and including 20%. When operating on slopes greater than 20%, please contact Michelin. For moldboard plowing with single drive tires in the furrow, a minimum inflation pressure of 10 psi is required. Availability: Comments:

Copyright ©2010 Michelin North America, Inc. · Photos Copyright: Michelin